Regal Warm Air Furnace
Selling points of the Regal Furnace
Click Here for Detailed Specifications
Clean out ports that extend through the front wall of the cabinet. Soot does not fall through and down into the outside of the heat exchanger.
Enclosed burner cabinet.
The color is a neutral beige in a textured powder coat paint.
The heat exchanger is a primary and secondary design, with portions of the primary heat exchanger made from 10 gauge hot rolled steel. The primary heat exchanger is also lined with 430 stainless steel just above the combustion chamber. The secondary heat exchanger is made from 14 gauge hot rolled steel.
The combustion chamber is fiber. It is held in place with stainless steel banding. The chamber pulls out of the heat exchanger and can be replaced if damaged in cleaning.
All units are 4 speed direct drive.
Note the A/C tonnage. The Air conditioning tonnage on these units are well above average and can be noted as a selling point.
Also the efficiencies are well above average and should be noted.
The units are multi fired. There are 3 firing rates for the smaller units, .60, .75, and .85. The larger units are fired at 1.00 and 1.25. These units are all set up at 100 psi.
The REH 750 is a little shorter than the average oil furnace at 53 1/2", most units are 55" and 56". The lowboy is also smaller at 40" most units are 43" to 46" high.
The units are available with Beckett, Carlin, and Riello burners.
A limited lifetime warranty on the heat exchanger and 1 year on parts.
The furnace comes in a wood crate.